Technical Data; Functions; Optionals; Installation - Ksenia ergo KSI2100000.300 Guide De Programmation

• LCD Display 16x2 (visible area 61 x 16mm)
• "Capacitive Sensing" Technology (no mechanical press-buttons)
• Circular Scroll : quick menu access
• Available in 4 different colors
• RFID/ NFC Proximity Reader
• Integrated Microphone and Speaker for recording and remote listening
• "Fast Addressing System": no need to pre-set the device address (automatic
recognition from the Control Panel/GSM Communicator)
• Power supply: 13,8Vdc
• Consumption: 15mA standby, 400mA max
• Nr. 2 programmable terminals as inputs (e.g. for zones, contacts), or as Open
Collector outputs (500mA max.)
• 1 supply output for external devices (0,5 A max)
• Plug & Play BUS for Supply & Communication purposes
• RFID/NFC 13.56 MHz (max. distance 2 cm.)
• Operating temperature range: 5 - 40°C
• Overall Dimensions: 105 x 145 x 25 mm
• Weight: 180 gr
• Display of system status
• Display of functioning parameters ( date/time, active GSM network, GSM level, etc)
• System commands (complete or partial arming, reset, activation of outputs terminals,
phone calls, etc.)
• Full Programming of system parameters
• Programming of local parameters (audio volume, backlight levels)
• KP functionality exclusion for front cleaning purposes
• Remote Listening
• Vocal messages recording
• RFID/NFC Tag reading to arm and disarm the intrusion detection systems set up
with the lares devices.
KIT 1,5 m. cable for GSM/GPRS programming - p/n KSI7500000.000
Table sustainer - p/n KSI2100001.300
KIT ergo keypad - p/n KSI2100002.300
The keypad ergo can be installed directly on a wall or put in an DIN 503 box set in the
wall or leant on a plain surface by means of the proper sustainer.
All manuals and user guides at all-guides.com

TECHNICAL DATA

FUNCTIONS

OPTIONALS

INSTALLATION

ergo
15