Introduction - Sunrise Medical Jay J3 Carbon Manuel D'utilisation

ENGLISH
Sunrise Medical recommends that a clinician such as a
doctor or therapist experienced in seating and positioning
be consulted to determine if a J3 Carbon Back is
appropriate.
WARNING!
Backs should only be installed by:
• An authorized Sunrise Medical supplier.
• A qualified and competent healthcare professional who
has undergone appropriate certified training by either
sunrise medical or their approved supplier.
THE JAY J3 CARBON BACK INTENDED USE
The Jay J3 Carbon Back is intended to provide a back
support for a wide variety of wheelchair users. It is
designed to provide simple, comfortable and effective
support to help maximise function and increase sitting
tolerance. In addition, it is light-weight, durable and easy to
use.
The back can be installed onto a wide range of
wheelchairs.
Maximum user weight: 125 kg (275 lbs).
The intended lifetime of the back rest is 2 years.
WARNING!
Installing a back support on a wheelchair may affect the
center of gravity of the wheelchair and may cause the
wheelchair to tip backwards potentially resulting in injury.
Always assess for the potential need for anti-tippers
or amputee axle adapter brackets to be added to the
wheelchair to help increase stability.
WARNING!
Do not use J3 Carbon Back to push or lift wheelchair.
Improper use may cause the back to unexpectedly detach
from the wheelchair.
WARNING!
Do not use the J3 Carbon back handle to lift wheelchair. It
is intended only for back removal.
WARNING!
Carelessness causes fire.
WARNING!
Please read this manual before usage.
J3 Carbon Back 127048
J3 CARBON BACK
10mm Box End Wrench
Mid Thoracic (MT)
Cover
Posterior
Lower Thoracic
Fixed Mounting
Hardware
7

INTRODUCTION

4mm Hex Key
Shell
Foam
Base
Mid Thoracic
QR Mounting
Hardware
US = Rev. A, EU = REV.1.0