Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.4.3 Installation of ventilation grill for
ovens with interior ventilation
For these ventilation variants, install a ventila-
tion grill above the oven with the dimensions :
width = 522 mm
height = 90 mm .
Proposal :
4.5 Exhaust duct system
(refrigerator)
The exhaust gas duct system must be made in
such a manner as to achieve a complete
extraction of combustion products to the out-
side of living space. The flue gas is vented
directly through the upper grille. Do not use
any kind of aluminium flue pipe to lead the flue
gas out.
The T-piece (Fig. 28) must be aligned with the
exterior wall.
All manuals and user guides at all-guides.com
Fig. 27
45°
Fig. 28
CAUTION!
EAn installation other than described will
reduce the cooling capacity and jeopardi-
se the manufacturer's warranty/product
liability.
4.6
Securing the refrigerator
In the sidewalls of the refrigerator, there are
four plastic sleeves for securing the refrigera-
tor. The sidewalls or strips attached for secu-
ring the refrigerator must be prepared to hold
the screws firmly in place even when under
increased load (while the vehicle is moving).
Fastening screws and caps are supplied with
the refrigerator.
CAUTION!
Always insert screws through the sleeves
provided as otherwise components laid in
foam, such as cables etc., could be dama-
ged.
After the refrigerator is put in its final place,
secure the screws into the wall of the recess.
The screws must penetrate the casing of the
refrigerator.
17
Installation
Fig. 29
Publicité
Chapitres
Table des Matières
