Example Of A Firing Program; Program Examples (Ceramics) - Rohde ST 410 Notice D'utilisation

Step Display screen
P14-
5
P45-
6
0
7
3
8
3
9
10
20
11

11. Example of a firing program

11.1. Program examples (ceramics)

Initial firing
1
1050°C
Biscuit firing
2
950°C
Earthenware
3
1050°C
High-temperature
4 stoneware
1250°C
Icon Description
The main display shows the first
configurable parameter.
The parameter to be configured
can be selected by pressing the
d f
and
The set value of the parameter to
be configured can be called up
g
with the
This can be altered by pressing the
d f
& keys.
j
The key saves the value.
The control system display goes
dark for a moment and the control
system restarts.
After the restart, the control unit is
ready for operation again.
100°C/h 1050°C
60°C/h 600°C
150°C/h 900°C
150°C/h 900°C
keys.
key.
00 h:00 min FULL/SKIP
00 h:00 min 100
00 h:00 min 100
00 h:00 min 60
76 / 280
Remark
As an example, the value "3" (control of
the fan cooling system on the furnace)
has been set for parameter no. 45
(additional switching output) (see
Section 10.2.)
The set value is now permanently saved
for the respective parameter.
01 h:30
1050°C
min
00 h:00
950°C
min
00 h:30
1050°C
min
00 h:05
1250°C
min
END
END
END
END