Osd Timeout - Panasonic CF-VDL02 Mode D'emploi

(Auto Configuration)
Auto Config
Yes
(Miscellaneous)
Miscellaneous
Init NVRam

OSD Timeout

OSD Position
(Information)
SYSTEM INFO
Version:
V-Freq-:
H-Freq-:
PixelCLk:
Width:
Height:
3
Press
The OSD main menu disappears.
All manuals and user guides at all-guides.com
Auto Configuration automatically adjusts image position, clock, and phase.
A confirmation box is displayed. The default selection is [Yes]. Press
ecute the menu. If you want to cancel, select [No] and press
No
To save the adjusted value, select [Brightness], then press
Select the item by pressing
Init NVRam
All values of the OSD menu are set to default.
A confirmation box is displayed. The default selection is [Yes]. Press
ecute the menu. If you want to cancel, select [No] and press
OSD Timeout
OSD Timeout is used to set the OSD idle time-out. If no active action, key press or
automatic configuration occurs for the defined period, the OSD menu is closed.
There are four OSD time-out values available.
Select the item by pressing
OSD Position
The sub-menu is displayed.
Select the item by pressing
The sub-menu is displayed.
Adjust by pressing
This menu is used to display information about the system. The OSD window is
displayed for 60 seconds after which control returns to main menu. If
the information window is closed and the main menu is displayed.
or , then press .
or , then press .
or , then press .
or , then press . (If you want to cancel, press
to ex-
.
.
to ex-
.
E
)
is pressed,
13