Dometic FRIGO DC Notice D'utilisation page 11

All manuals and user guides at all-guides.com
Frigo DC
✓ During the defrosting phase, the last measured cargo space temperature is
shown on the display and not changed.
✓ The
✓ The
After the defrosting process, the refrigeration system switches back to cooling
mode automatically.
Manual defrosting
The manual defrosting process can be started via the control unit as follows:
➤ Press and hold the
✓ The defrosting process starts (chapter "Automatic defrosting" on page 10).
5.7 Cargo space door status
(supplementary equipment)
I
NOTE
The door status function is only possible if the cargo space door is additionally
installed with a door contact switch.
5
Cargo space
Fig. 5:
If the cargo space door is open while the refrigeration system is still in operation,
the message "cargo space door open" is displayed.
✓
✓ The refrigeration system is automatically switched off for the length of this
message.
✓ An acoustic warning signal sounds after 2 minutes.
➤ You can acknowledge the acoustic warning signal with the
➤ Close the cargo space door.
EN
symbol lights up.
symbol flashes during the drip time.
P
button for at least 2 seconds.
P
door open
appears on the display.
Operation
button.
11