Turning Answering Machine On Remotely - Topcom Butler 2450 Mode D'emploi

All manuals and user guides at all-guides.com
HANDL. B2450_euro.qxd 19/7/02
Butler 2450

7.16 Turning Answering Machine On Remotely

If the answering machine is switched off, you can turn it on remotely.
• Call your machine.
• The machine will pick up automatically after 10 rings and play outgoing message 2.
• Dial the VIP code (default 321) slowly during the message plays.
• Press the '9' key.
• The internal voice will say that the answering machine has been turned on.
• Press '6' to stop operation.
8 TROUBLE SHOOTING
Symptom
No display
No tone
The icon
flashes
Base or handset
do not ring
Tone is good, but
there is no
communication
Telephone does not
react to pressing
the keys
Flash (R) Key does
not work
2:56 pm Page 32
Possible cause Solution
Batteries uncharged Check the position of the
batteries
Recharge the batteries
Handset turned OFF Turn ON the handset
Telephone cord badly Check the telephone
connected cord connection
The line is occupied Wait until the other handset
by another handset hangs up
Handset out of range Bring the handset closer to
the base
The base has no power Check the mains connection
supply to the base
The handset is not Register the handset to the
registered to the base base
The ringing volume is Adjust the ringing volume
zero or low
The dialling mode is Adjust the dialling mode
wrong (pulse/tone)
Manipulation error Remove the batteries and
but them back in place
Keypad lock ON Turn OFF the Keypad Lock
Wrong Flash time Change the flash time
32 32