Fermax DUOX VIDEO F7391 Manuel D'installation page 32

DUO DUO X Pr X Pr o o o o o g g g g g r r r r r amming X Pr
DUO X Pr DUO DUO X Pr
DUO DUO X Pr o o o o o g g g g g r r r r r amming X Pr X Pr
DUO X Pr
DUO DUO X Pr
3. Thenthe amplifier will ''beep'' for every second the
opening time has been programmed from the exit
button.
3.1.If you want to change this value, you must press
any call button as often as the seconds you wish
to program.
3.2.If you do not want to change, just wait 10 seconds
without pressing any call button.
4. Exit Programming:
To exit programming mode, wait 10 seconds without
pressing any key. A «beep beep» tone will sound to
indicate that you have exited time programming
mode.
5. From that moment you can remove the short-circuit
between the terminals «Bs» and «-» (negative) from
the amplifier and you can use the amplifier as
normal.
Notes:
• Values:
- Lock-release time:
- Exit button time:
•
On mixed panels with buttons and keypads this
method is not permitted and changes must be made
via the keypad.
Pag 32
amming amming
amming amming
amming amming
amming
amming
01..99 sec. (Default: 03).
00..99 sec. (Default: 06).