Unit Installation; Electrical Connection; Handover; Technical Data - AEG VH 211 Notice D'utilisation Et De Montage

For the Fitter
2.3

Unit installation

2.3.1 Making secure
The following action should be taken to secure the equipment:
screw the supplied hanging bracket (3) horizontally to the installation wall. – bracket with the cut-
out facing upwards –. Use suitable securing materials (screws, dowels), according to the type of wall.
Using the horizontal and vertical elongated hole, alignment is possible if the fixing hole is out of
true.
Hang the unit onto the hanging bracket using the upper vertical recesses of the unit rear panel.
Screw up the unit and hanging bracket with the securing screw (4).
2.4

Electrical connection

Electrical connection can only be made to an AC 230 V ~ 50 Hz supply.
For the purpose of connection, an earthed socket or unit connection box for permanent connection
should be installed at the side of the heating unit, at least 10 cm away from it. In the case of a
permanent connection, the connection cable must not lie against the unit and should be shortened in
such a way (cut off the plug) that it leads directly to the permanent connection box.
The stripped wire ends are tipped with wire end sleeves.
* in the case of operation with external room thermostat (see page 3).
2.5

Handover

Explain the functions of the unit to the user. Draw his or her attention to the safety instructions, in
particular. Hand the operating and installation instructions to the user.
2.6

Technical data

Type
Dimensions H / W / D
Weight
Connection
Output
Temperature adjustment range
Frost protection
Protection class
Protection mode
Approvals
3.

Guarantee

For guarantee please refer to the respective terms and conditions of supply for your country.
The installation, electrical connection and first operation of this appliance should be carried out
by a qualified installer.
The company does not accept liability for failure of any goods supplied which are not installed in
accordance with the manufacturer's instructions.
3.1

Environment and recycling

Please help us to protect the environment by disposing of the packaging in accordance with the
national regulations for waste processing.
3.1.1 Recycling of obsolete appliances
Appliances with this label must not be disposed off with the general waste. They must be
collected separately and disposed off according to local regulations.
10
All manuals and user guides at all-guides.com
mm
kg
kW
°C
°C
VH 211
400 / 276 / 115
3,0
1/N ~ 230 V 50 Hz
2,0
approx. 5 to 35
approx. 5
II
IP 23, splash-proof
see unit rating plate