Valor Madrona MFCS05 Manuel D'installation page 5

Right Side Stove Panel
12. Lay the right hand
side stove panel on
the floor. Identify the
front and the rear of
the panel.
13. Lay the engine on
its side and drop it
down on the side
panel, fitting the
slots of the engine's
rear panel on the
studs and lining up
the top hole of the
engine with the hole
of the side panel's
bracket.
14. Secure the engine to the side panel with a washer
and nut on the studs at the rear and at the top
front.
15. Identify the front and rear of the lower bracket:
"U" shaped fixing points towards the front.
"U"shaped
fixing point
Lower bracket
Front
Rear
"U"shaped
fixing point
16. Insert the lower bracket between the engine side
supports over the studs. Secure the right side with a
washer and nut.
Left Side Stove Panel
17. Place the left side panel on the floor, internal face
up, and secure the pipe support bracket to the
panel with a bolt provided.
18. Place the left side
panel on top of the
engine ensuring
the panel's studs at
the rear and at the
bottom front slide
into the engine's
slots.
19. Secure the side panel
to the engine with a
washer and nut on
the studs at the rear
and at the top front.
5