Storage And Cleaning - Braun VitalScan Plus BP 1750 Mode D'emploi

• Push button (C) again to adjust the date: The lower display line shows «Date» and
flashing digits in the month position. Adjust the month by repeatedly pushing the
«memo» button.
• Push button (C) again: The day digits will flash. Again, repeatedly push the
«memo» button to adjust the day.
• To exit the time and date setting mode, push button (C).
• Otherwise the device automatically turns off after 2 minutes and activates the
settings made so far.

Storage and cleaning

Clean the product with a soft, slightly damp cloth. Stains on the cuff (G) can be
carefully removed with a damp cloth. Do not wash or dry clean the cuff. Do not store
the product in a place exposed to direct sunlight or high humidity.
Calibration
This product has been calibrated at the time of manufacture. If used according to the
use instructions, periodic recalibration is not required. If at any time, you question the
measuring accuracy, please contact an authorized Service Centre (See Package
Insert for a local Service Centre).
What to do if ...
Problem
ERR
20
Reason
Batteries are flat.
Measurement /
handling error
Solution
Insert new batteries.
Repeat measurement as
described under «Taking a
measurement».
If problem persists, contact an
authorized Service Centre.