Braun VitalScan Plus BP 1750 Mode D'emploi page 19

memo
memo
memo
memo
Setting time and date
• Push the time/date button (C). The lower display line shows «Time» and a flashing
digit in the «hour» position. To adjust the hours, repeatedly push the «memo»
button.
• Push button (C) again: The minutes digits will flash. Again, repeatedly push the
«memo» button to adjust the minutes.
BP 1750: The average of the last three readings will be
displayed. The lower display line shows «A-3», indicating
that the average value is displayed.
BP 1700: The last reading will be displayed. The lower
display line successively shows date, time and pulse of
the respective measurement.
• Repeatedly pressing the memory button will call up one
by one all stored readings.
• Continuously pressing the memory button will scroll
through all stored readings.
• To exit the memory mode, turn the device off by
pressing the I/O button.
Time
19