Read This First - Panasonic BT-LH2600W Guide D'installation

Read this first!

■ Installation to be performed by certified personnel only.
■ Do not install on wall where tolerance is weak.
(The LCD monitor may fall, damaging the wall and causing injury.)
Make sure the wall can withstand five times the weight of the LCD monitor together with the
wall mount adaptor.
■ Install only on vertical wall.
(The LCD monitor may fall, damaging the wall and causing injury.)
• Firmly install to the wall, making sure the weight of the LCD monitor together with the wall
mount adaptor can be withstood, and there is no slackness resulting from vibration, etc.
(For details on the weight of the LCD monitor, refer to the operating instructions of the LCD
monitor.)
■ Do not disassemble or modify the wall mount adaptor.
(The LCD monitor may be damaged or fall, causing injury.)
■ If the area for installation is not strong enough, be sure to reinforce the area.
(If the installation area is not strong enough, and the screws become loose, the LCD monitor
may fall, causing injury.)
■ Install only the designated LCD monitors.
■ Install only using the designated method.
■ Do not install the wall mount adaptor horizontally, at an angle, or upside down.
(Otherwise, the LCD monitor may fall and become damaged, and cause injury.)
■ Do not install in the following locations.
•
Outdoors or in an environment like being outdoors
•
Location subject to humidity, lots of dust, oil and smoke, steam, or heat
•
Location with risk of vibration or shock
•
Where hot air is coming out from heating equipment
•
Beneath air conditioner where there is a risk of water drop
(Otherwise, this may cause fire, electric shock, or drop.)
■ Do not use staple to secure the cable.
(Otherwise, this may cause fire.)
■ When installing, use a method that is appropriate for the structure and material of the
installation location.
■ When installing, always use the supplied components.
(Otherwise, this may cause damaged LCD monitor to fall and cause injury.)
■ Make sure installed screws do not touch any wiring inside the wall.
(Otherwise, this may cause electric shock.)
4
Always follow these precautions