Using Infant Restraint; Positioning Harness Straps - Graco MODES 3 LITE Mode D'emploi

7.0 Using Infant Restraint

7.1 Positioning Harness Straps

FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS FOR
YOUR CHILD INCREASES THE RISK OF SERIOUS INJURY OR
DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP, OR
CRASH. The harness straps must be properly adjusted to fit your child
according to the following instructions.
1. Remove infant restraint
from base and rotate handle
down to sitting position.
See "5.1 Adjusting Handle" and
"5.2 Removing and Attaching
Infant Restraint", page. 23.
2. Place child in seat as shown Ê.
3. Determine which pair of harness slots are even
with or just below your child's shoulders Ë.
4. If the harness straps must be
adjusted: remove child from infant
restraint and move harness straps
to the proper harness slots by doing
the following:
All manuals and user guides at all-guides.com
35
Ê
Use harness slots
even with or just below
child's shoulders
Ë