WMF LONO Mode D'emploi page 14

Initial operation and general information
The induction milk frother is intended for heating and frothing milk and milk substitutes. In general,
the following milk types can be used:
fresh milk, UHT milk (including from cows, sheep and goats) and lactose-free milk as well as milk
substitutes (such as soya milk) with various fat contents.
The quality and volume of the milk foam depends on the type and characteristics of the milk being
used (e.g. the fat and protein content, temperature, etc.).
Prior to initial use, clean the device as described in the section entitled „Cleaning and care." Any sur-
plus length of the connecting cable can be wound around the bottom of the device's base (6). Connect
the mains plug to an earthed wall socket, the on/off button (7) lights up in red.
The WMF LONO Milk&Choc has four programmes:
Symbol Programme
Hot milk foam
Cold milk foam
Hot milk
Hot chocolate
14
Application
This thick milk foam is
perfect for use with cap-
puccino or latte macchiato
drinks.
This cold, creamy milk foam
is especially well suited for
frappé drinks, cocktails, iced
coffee and desserts.
This programme provides a
quick and easy way to heat
milk, e.g. for latte coffees
or cups of warm milk.
Use this programme to
make hot chocolate drinks
using crumbled chocolate.
DISC Filling volume
WMF Milk System
MIN 150 ml
MAX 350 ml
MIN 150 ml
MAX 350 ml
MIN 150 ml
MAX 500 ml
WMF Choc System
MIN 150 ml
MAX 350 ml
chocolate
MAX 34 g
milk