Log Arrangement: Natural Gas; Log Arrangement: Propane - HASE Luno Gas Mode D'emploi

2.12 Log Arrangement: Natural gas

1/2 bag of Embers, 6 ceramic logs
Procedure: First place the Mat on top of the Bur-
ner and place the grate plate on top of the Mat
and Burner.
Lay the large log on top of the grate at the rear of
the fi rebox (Fig. 16).
Scatter the contents of the bag of embers on top
of the burner and grate, these should be evenly
spread, ensuring that the pilot is not impinged,
and that no embers enter the Pilot Shield (Fig.
17).
Place the four intermediate logs, so that rear of
each is sitting on top of the large log and the
opposite end of each log is lying towards the
front of the fi re.
Lay the fi nal small log at the very front of the fi re
box, positioned so that it is in front of the Pilot
shield (Fig. 18).
The Pilot fl ame must be left visible when lit.
All manuals and user guides at all-guides.com
Fig. 16
Fig. 17
Fig. 18

2.13 Log Arrangement: Propane

1/2 bag of Embers, 6 ceramic logs
Procedure: First place the Mat on top of the
Burner and place the grate plate on top of the
Mat and Burner.
Lay the large log on top of the grate at the rear
of the fi rebox.
Scatter the contents of the bag of embers on top
of the burner and grate, these should be evenly
spread, ensuring that the gas ports are left clear,
the pilot is not impinged, and that no embers
enter the Pilot Shield (Fig. 19).
Place the larger two of the four intermediate logs,
so that rear of each is sitting on top of the large
log and the opposite end of each log is lying
towards the front of the fi re, one at each end of
the burner, these two logs should be touching
the sides of the fi rebox (Fig. 20).
Place the remaining two intermediate logs
so that the rear end is lying on top of the rear
log and is touching the rear of the fi rebox. The
opposite end of the logs should be sitting on the
centre of the burner. Ensure that the gas ports
are left clear.
Lay the fi nal small log at the very front of the fi re
box, positioned so that it is in front of the Pilot
shield (Fig. 21).
The Pilot fl ame must be left visible when lit.
Fig. 19
Fig. 20
Fig. 21
6