Door Open Alarm; Childlock Function; Drinkschill Function; Daily Use - AEG RKE64021DW Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.7 Door open alarm

An acoustic alarm will sound if the door
is left open for a few minutes. The door
open alarm conditions are indicated by:
• a flashing Alarm indicator;
• an acoustic buzzer.
When normal conditions are restored
(door closed), the alarm will stop. The
buzzer can also be switched off by
pressing any button.

4.8 DrinksChill function

Use this function to set an acoustic alarm
at the preferred time for example when a
recipe requires to cool down food
products for a certain length of time.
1. Press Mode until the corresponding
icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Temperature colder or
Temperature warmer button to
change the Timer set value from 1 to
90 minutes.
3. Press OK to confirm.
The DrinksChill indicator is displayed.
The Timer starts to flash (min).
It is possible to change the time at any
time during the countdown and at the
end by pressing the Temperature colder
button and the Temperature warmer
button.
At the end of the countdown, the
DrinksChill indicator flashes and an alarm
sounds. Press OK to switch off the sound
and deactivate the function.

5. DAILY USE

WARNING!
Refer to Safety chapters.
5.1 Storing food in a fridge
compartment
Cover or wrap the food, particularly if it
has a strong flavour.
Position the food so that air can circulate
freely around it.
It is possible to deactivate the function at
any time during the countdown by
repeating the function steps, until the
indicator disappears.

4.9 ChildLock function

Activate the ChildLock function to lock
the buttons from unintentional
operation.
1. Press Mode until the corresponding
icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function,
repeat the procedure until the ChildLock
indicator goes off.
4.10 DYNAMICAIR function
1. Press Mode until the corresponding
icon appears.
The DYNAMICAIR indicator flashes.
2. Press OK to confirm.
The DYNAMICAIR indicator is shown.
The activation of the
DYNAMICAIR function
increases energy
consumption.
If the function is activated
automatically, the
DYNAMICAIR indicator is
not shown (refer to "Daily
use").
To switch off the function, repeat the
steps until the DYNAMICAIR indicator
goes off.
Keep the food on all shelves no closer
than 20 mm from the rear wall and 15
mm from the door.
5.2 DYNAMICAIR
The refrigerator compartment is
equipped with a device that allows rapid
cooling of food and keeps a more
uniform temperature in the
compartment.
ENGLISH
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rke64021dx

Table des Matières