Kemper FK-5 Instructions De Montage page 4

EN
Installation and use
and retain for later reference!
Warning! Installation and maintenance is to be
sionals qualified for electrical facilities!
Warning!
plumbing as well as accident prevention must be
Warning! Ensure sufficient bracketing, bearing
according to wall and ground properties.
Note!The installation location must be a closed-in,
Upstream and downstream of the Break Tank
Station stop valves must be provided. The feed
lines must be fitted with a dirt strainer each of
Note! It is essential that following the installation
a leak test of the water-bearing components as
well as a functional test is carried out.
Danger! To isolate from mains disconnect the
work.
Note! If the FK5 is installed adjacent to
living rooms, bedrooms, classrooms or
work areas, we recommend to fasten it
4 / 60 – K410036900022-00 / 10.2018 – © www.kemper-olpe.de / Technische Änderungen und Irrtum vorbehalten.
All manuals and user guides at all-guides.com
Safety instructions for installation, maintenance and operation
Select bracketing components
Warning information
these instructions. Disregard of the warning infor-
Danger!
Indicates hazards that might result in
Warning!
-
contamination of drinking water.
Note!
malfunctions.
Use
separating potable from non-potable water
DIN EN 1717 / DIN 1988-100.
Do not fill with flammable or explosive media.
Warning!
purpose as Break Tank Station in enclosed,
Warning! Disregard of instructions during installa-
tion, use or maintenance can impair proper operation
and can cause considerable health problems due to
the mixture of drinking and non-potable water.
Note! Service hotline for the areas of
commissioning and maintenance 02761
891-888 and servicegt@kemper-olpe.de.