Intended Use; Prohibited Use - HOLZMANN MASCHINEN ED 300FD Mode D'emploi

SAFETY
11.1

Intended use

The machine in perfect working condition and as safety, and use risk-conscious! Faults which
could affect safety must be rectified immediately!
It is generally forbidden to modify safety equipment of the machine or to make ineffective!
The machine is designed exclusively for the following activities:
Longitudinal and transverse turning round or prismatic shaped workpieces made of metal, plastic
or similar non-hazardous and non-dust raising materials.
For a different or additional use and resulting damage or injury takes HOLZMANN-
MASCHINEN no responsibility or warranty.
Use only cutting tools allowable for this machine!

Never use a damaged cutting tools!

Use the machine never with defective or without mounted guard

Working conditions
The machine may be operated:
humidity
temperature
The machine shall not be operated outdoors or in wet or damp areas.
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
11.2

Prohibited use

 The operation of the machine outside the stated technical limits described in this manual is
forbidden.
 Operation of the machine function without emergency stop button or impeller box with open
doors is prohibited.
 The use of the machine not according with the required dimensions is forbidden.
 The use of the machine not being suitable for the use of the machine and not being certified is
forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in tis manual is forbidden.
 The unattended operation on the machine during the working process is forbidden! It is not
allowed to leave the immediate work area during the work is being performed.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
W A R N I N G
HIGHEST RISK OF INJURY!
max. 70%
+5°С to +40°С (+41°F to +104°F)
SAFETY
25
ED300FD