INSTALLATION OF DISPENSING EQUIPMENT
4. Install the Air Scoop Kit. Start by
removing the upper set of screws
EN
located above the fan on the back wall
of the cabinet.
5. Assemble components from the kit as
follows – Insert black snap bushing
into air scoop mounting bracket,
then insert one end of the air snorkel
through the snap bushing. A zip-tie
can be inserted behind the mounting
bracket to keep the tube in place.
6. Insert end of the snorkel up into the
tower and screw air scoop mounting
bracket into vacated holes above the
fan.
14
©2021 Hestan Commercial Corporation
(continued)