hestan GFDSR241 Manuel D'installation page 10

Masquer les pouces Voir aussi pour GFDSR241:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DOOR INFORMATION
DOOR LOCK INSTALLATION
DOOR LOCK INSTALLATION
EN
Proper woodworking materials and equipment
should be used to avoid damage or errors in
workmanship.
NOTE: Lock installation information is available
on the above-mentioned template drawings.
Take care in choosing the correct template for
your specific model.
When installing to an overlay panel, perform the
lock installation before mounting the overlay to
the door!
1. See Figure 5. Attach mounting bracket to
overlay panel.
2. Insert lock body and attach with nut. Re-
install remaining parts as shown.
OVERLAY INSTALLATION
OVERLAY INSTALLATION
Before beginning installation, check all components for proper fit and finish.
NOTE: For more detailed installation information, please request or download document 028374
mentioned on the previous page.
solid doors.
1. With the unit secured in position, open the door, CAREFULLY remove the door gasket (it can
tear), and make sure panel pre-drilled holes align with door frame holes.
2. Loosely attach four corners of overlay panel to the door using #10 x 3/4" wood screws, installed
through the door frame from the rear.
3. Check the overall fit of the overlay panel, position, and function. Make minor adjustments as
necessary. When panel is properly aligned, tighten mounting screws securely. Install the rest of
the mounting screws and tighten securely.
4. Re-install the gasket making sure the dart is securely pressed inside the slot on the door frame.
Start at the four corners and firmly press your way inwards.
5. Verify that the gasket is fully seated onto the door frame when completed.
10
©2021 Hestan Commercial Corporation
(continued)
For best performance and functionality, the overlay panels should be 3/4" [19
mm] thick. The weight of the overlays should not exceed 20 lbs [9 kg] for
Do not overtighten overlay panel attachment screws, as this may damage the
factory supplied door frame.
Mounting Bracket
Nut
Lock
Cylinder
Figure 5. Installing Door Lock
Lock Striker
Lockwasher
Screw
Lock Bracket

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Gfdsr242

Table des Matières