INSTALLATION OF DISPENSING EQUIPMENT
EN
All hose connections
use worm-drive
hose clamps (view
enlarged to verify)
NOTE: Image does not accurately reflect positions of the
different elements within the unit. Postions and hose lengths
shown are to clearly illustrate proper connection methods only.
12
©2021 Hestan Commercial Corporation
Apply silicone to
bottom flange
Flange Sleeve
Beer Connection
Keg
Keg Coupler
Dispensing Head
(continued)
Faucet Lead
Air Distributor
Regulator
Distributor is only on
multiple keg units, each
keg is connected to a
valve on the air distributor.
Single keg connected
directly to the regulator.