Miele STB 201 Mode D'emploi page 66

en (USA) - Maintenance and care
,
Always turn off the vacuum clea-
ner and disconnect the plug from
the electrical supply before cleaning
or servicing the Turbobrush or vacu-
um.
Removing threads and hairs
wrapped around the roller:
^ Cut any threads or hairs that have
become entangled on the brush roller
with a pair of scissors. The cut pieces
will be drawn in by the suction power
of the vacuum cleaner the next time it
is used.
More obstinate tangles or blockages
can be removed after opening the roller
cover. Any large particles which have
been drawn in can then be removed.
^ Loosen the two locking screws using
a coin or screwdriver, and remove
the roller cover.
^ Remove any items stuck in the brush
compartment or wrapped around the
roller brush.
^ Replace the cover and tighten the
locking screws.
^ Tighten the locking screws.
66
All manuals and user guides at all-guides.com