Miele STB 201 Mode D'emploi page 65

Attaching the Turbobrush to
the Miele Vacuum Cleaner
Model STB 205
This Turbobrush is intended for use
with Miele vacuum cleaners only.
^ Insert the suction wand into the neck
of the Turbobrush as shown. If the
locking mechanism does not comple-
tely engage, gently twist the wand
while it is in the neck until it clicks into
place.
Using the Sliding Air Flow
Regulator
The Turbobrush is driven by the suction
power of the vacuum cleaner. Deeper
pile carpeting can be drawn into the
suction opening, thereby obstructing
airflow and impeding the action of the
roller
^ This can be remedied by sliding the
air flow regulator to the left as shown
in the left hand illustration.
For routine cleaning of low-to-medium
pile carpeting, or for deep cleaning in
general, slide the airflow regulator to
the right as shown in the far right
illustration.
^ See right hand illustration to close the
Airflow Regulator.
All manuals and user guides at all-guides.com
en (USA) - Operation
65