ResMed Remote Alarm II Mode D'emploi page 9

Masquer les pouces Voir aussi pour Remote Alarm II:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IEC 60601-1-11:2010
classification
Nominal dimensions
(L x W x H)
Power supply
Weight
Housing construction
Cleaning solutions
Compatible devices
Symbols
The following symbols may appear on your product or
packaging.
Indicates a Warning or Caution. A warning alerts you to
possible injury or explains special measures for the safe and
effective use of the product; a caution alerts you to possible
damage to the product;
Keep away from rain;
limitation;
Manufacturer;
European RoHS;
Battery charge level;
Catalogue number;
REF
Prescription only (In the US, Federal law restricts these
devices to sale by or on the order of a physician).
Storage
Ensure that the Remote Alarm is clean and dry before storing
for any length of time. Remove the batteries from the Remote
Alarm before storing. Store your Remote Alarm in a dry place
out of direct sunlight.
Read instructions before use;
Drip proof;
IP22
Humidity limitation;
European authorized representative;
Canadian Standards Association;
Serial number;
Transit operable equipment.
5.70" x 3.15" x 1.22"
(145 mm x 80 mm x 31 mm)
Two AA 1.5V Batteries
(LR6 – Alkaline or FR6 – Lithium)
4.06 oz (115 g) Remote Alarm only
(without battery)
Flame retardant engineering
thermoplastic
The following cleaners and
disinfectants are compatible for use
when cleaning the external surfaces
of the Remote Alarm.
• Cavicide
®
• Mikrozid
AF
®
• dilute Hypochlorite
• Isopropyl alcohol
• Teepol Multipurpose detergent
and Actichlor Plus
• Bleach (1:10)
Always follow the manufacturers
recommended cleaning instructions.
The Remote Alarm II is compatible
with the following ResMed devices:
• Astral series of ventilators
• Stellar series of ventilators
Class II equipment;
Alarm mute;
LOT
Temperature
Batch code;
Unlock;
 Lock;
English
7

Publicité

Table des Matières
loading

Table des Matières