Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Indicators and alerts
The Remote Alarm provides the following indicators and buttons.
LED indicators
Alarm button
4
Indicated by
Audible alert and
Red flashing alarm
bar.
Blue solid LED
Audible alert and
Yellow blinking
LED.
Audible alert and
Yellow LED – will
blink once every
10 seconds.
Green LED – will
blink once every
10 seconds
Volume level
button
Remote Alarm
mute button
Remote Alarm
self-test.
Status
An alarm has been activated
on the ventilator.
Indicates current alarm
volume level.
• The Remote Alarm has
been disconnected from
the ventilator.
• The LED will continue to
blink until the situation has
been resolved.
• The Remote Alarm battery
is low.
• The LED will continue to
blink until the situation has
been resolved.
• The audible alarm can be
muted but will sound every
4 hours until the battery is
replaced.
The Remote Alarm battery
is good.
Press until desired volume
level is achieved. Refer
to Setting the volume
instructions.
• Press the Remote Alarm
mute to silence the alarm
generated for a Low
Battery alert.
• Pressing the Remote
Alarm mute during a
disconnect will put the
Remote Alarm into a
power saving mode.
Press and hold to test the
functionality of the Remote
Alarm.
Publicité
Table des Matières
