Canon WG7000 Serie Démarrage page 27

Cleaning the Document Feed
Scanning Areas
Clean according to the steps on the labels
on the feeder and inside of the platen glass.
Use the supplied glass cleaning sheet when
cleaning the document feed scanning areas. Only
use the glass cleaning sheet for cleaning the
document feed scanning areas.
1. Open the feeder, and wipe the document feed
scanning area (long strip of glass) next to the
platen glass with the included glass cleaning
sheet.
CAUTION!
Do not use glass cleaner, alcohol solvent, etc.;
may remove antistain coating.
2. Wipe the document feed scanning area (long
strip of glass) on the feeder.
3. Open the document scan cover and wipe the
document feed scanning area (long strip of
glass) and its opposite area.
For details
"Maintenance" and "Frequently Asked Questions" in the Online Manual
Labels
4. Push the document scan cover until it clicks
closed.
5. Close the feeder gently.
If streaks still appear
Perform feeder cleaning.
1. Press , and select <Menu>.
2. Press <Adjustment/Maintenance>
<Maintenance> <Feeder Auto
Cleaning> <Start>.
EN
25