Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installing the Machine
To connect via USB
EN
1
Press <No> on the connection method
screen.
• The machine does not come with a USB cable.
Please have one ready.
• Make sure that the USB cable you
use is compatible with this
designation.
• Do not connect the USB cable before installing
the software. If you did, disconnect the USB
cable from the computer, close the dialog box,
and then perform the procedure from step 1 of
"Installing the Software".
Next, adjust the margins of the Cassette
Feeding Unit (optional).
12
P.14
Adjust the margins of the
Cassette Feeding Unit (optional)
1
Pull out paper drawer 3 and check the
margin adjustment values.
2
Enter the values for <Left Margin for Drawer
3> and <Left Margin for Drawer 4> you
checked at step 1 from the screen.
3
Place the paper drawer back into the
machine.
CAUTION
Be careful not to catch your fingers when
pushing in the paper drawer.
Next, print out and check a nozzle check
pattern.
3 +X.X
4
- X.X
Publicité
Table des Matières
