Installing The Software - Canon WG7000 Serie Démarrage

Installing the Machine
Network connection settings
After exiting the Setup Guide, continue by
EN
making settings to connect the network. Items to
set depend on the connection usage. Check
settings that apply to the following conditions.
If Using a Fixed IP Address
Proceed to "Connecting to a Network with a
Fixed IP Address (
Other
You are not required to make settings in the
following instances.
Proceed to "Installing the Software (
• Obtain an IP address automatically with DHCP.
• Since only a USB connection will be used, an IP
address is not set.
14
P.28)".
P.14)".

Installing the Software

• The procedures described here are for Windows.
For more details on the software installation
procedure, see the driver's manual.
• If connecting by USB, do not connect until
instructions to do so appear on the installation
screen. If you did, disconnect the USB cable from
the computer, close the dialog box, and then
perform the following procedure from step 1.
• Drivers for macOS are not bundled with your
machine. The latest drivers can be downloaded
from the Canon website.
1
2
If the screen is not displayed properly,
re-insert the DVD-ROM or search for "D:\
MInst.exe" on the Windows platform (This
description assumes that "D:" is the DVD-
ROM drive name).
Next, configuring Fax Settings
(WG7250Z/WG7250F) P.15