Technical Specifications - HP D2835A Notice

moorea.bk : moor-us.fb4 Page 10 Monday, May 5, 1997 5:05 PM
PICTURE TUBE
INPUT SIGNAL
INTERFACE
SCANNING FREQUENCY
MAX. RESOLUTION (H
WARM-UP TIME
PIXEL CLOCK
IMAGE SIZE
POWER SOURCE
OPERATING ENVIRONMENT
CABINET DIMENSIONS
WEIGHT
TILT/SWIVEL STAND
1. Use the standard image sizes to avoid distortion of the displayed image.
All manuals and user guides at all-guides.com
HP Ultra VGA 1280 User's Guide

Technical Specifications

Technical Specifications
Size
Phosphorous
Dot pitch
Face Plate
Video
Synchronization
Input Connector
Horizontal
Vertical
1280 ×1024 (60 Hz)
×
V)
30 minutes to reach optimum performance level
110 MHz
1
Standard size :306(H) x 230(V) mm
Maximum size: 320(H) x 240(V) mm
AC 90 to 264 V, 47 to 63 Hz, 100W (max), less than 15 W in Standby mode, less than 5 W in Sleep mode,
less than 1 W when switched off.
Temperature
Humidity
425(H) × 424(W) × 444(D) mm (with stand)
19 kg
Tilt Angle
Swivel Angle
10 English
17-inch flat screen/ 15.7-inch viewable image
Red, Green, Blue short persistence
0.28 mm
Anti-glare, multilayer coating
0.660 Vp p analog RGB
Separated H/V (TTL level), H/V mixed (TTL level)
15-pin mini D-SUB
30 to 69 kHz
50 to 160 Hz
5 °C to 40 °C (operating)
- 40 °C to +65 °C (storage)
5% RH through 90% RH (without condensation)
- 5° to +13°
±45°