Electrolux ERF3867SOW Notice D'utilisation page 38

38 www.electrolux.com
7.4 Removing the transport support
3
7.5 Rear spacers
All manuals and user guides at all-guides.com
2
5 5
4
Your appliance is equipped with transport
support to secure the door during trans-
portation.
To remove them do these steps:
• Open the door.
• Remove the transport support (2) from
the door sides.
• Remove the transport support (3) from
the lower hinge (some models).
• Remove the transport support (4) from
underneath the water unit.
• Cut the pump securing tie (5) and re-
move it.
Some models are fitted with a si-
lencing pad under the cabinet. Do
not remove this pad.
• Install the spacers provided within the
accessory bag as shown in the figure.
• Install the spacers on the brackets of
the condenser (black grill) at the back of
the appliance.