Garland XTRIM FIRST PG Manuel D'instructions page 26

English
controlled by the open and closed switch is dangerous
and must be repaired.
Keep the machine with a good maintenance. Ensure
all moving parts are aligned and that no other parts
are damaged or broken. If the machine is damaged,
repair before use. Many breakages occur because
machines are poorly maintained.
Maintain the cutting elements sharp and clean.
Cutting elements that are clean and well sharpened,
are easier to control and less likely to block.
Maintain the handles of these machines dry and
clean. Oily or greasy handles are slippery and will
cause loss of control of the machine.
Switch off the machine and unplug the spark plug
before carrying out any adjustments to any part
of the machine and before storage. Such security
measures reduce the risk of accidental start up.
If the machine starts vibrating in a strange way,
stop it and examine it to find out the cause. If the
motive is not clear, take the machine to your nearest
service agent. Vibrations are always an indicator that
the machine has a problem.
2.6. SERVICE
Periodically take your machine for revision by a
qualified after sales service and use only original
spare parts. This will guarantee that the machine is
always in good working condition.
26/124