Setting Up The Progressive Scan; Canceling The Progressive Scan - Samsung DVD-R120 Manuel De L'utilisateur

Setting up the Progressive
scan
If the TV supports Progressive Scan, press the
P.SCAN button on the front of the DVD Recorder to
enjoy.
With the unit in Stop mode, press the
1
P.SCAN button on the front of the DVD
Recorder.
The message "Press [Yes] to confirm Progressive
scan mode. Otherwise press [No]" will appear. Press
the œ √ buttons to select Yes, and then press the OK
button.
Press [Yes] to confirm Progressive scan mode.
Otherwise press [No]
Yes
The message "Please set your TV to
2
Progressive input.
[STOP] key." will appear. Press the OK
button.
Please set your TV to Progressive input.
To deactivate, press [STOP] key.
OK
3 The message "Video Output Mode
Progressive Scan" will appear.
Video Output Mode
Progressive Scan
Progressive setting is only available when
the Video Out is set to Component.
NOTE
If the P.SCAN button on the DVD
recorder's front panel is pressed during
playback, the message "This function is
only available in stop mode" appears on
the screen.
Progressive setting is only available when
the DVD recorder is in stop mode.
36
- English
No
To deactivate, press
Canceling the Progressive
scan
With the unit in Stop mode, press the
1
P.SCAN button on the front of the DVD
Recorder.
The message "Press [Yes] to confirm Interlace scan
mode. Otherwise press [No]" will appear. Press the œ
√ buttons to select Yes, and then press the OK
button.
Press [Yes] to confirm Interlace scan mode.
Otherwise press [No]
Yes
The message "Please set your TV to
2
Interlace input. To deactivate, press [STOP]
key." will appear. Press the OK button.
Please set your TV to Interlace input,
To deactivate, press [STOP] key.
OK
3 The message "Video Output Mode Interlace
Scan" will appear.
Video Output Mode
Interlace Scan
Do not press the P.SCAN button if you
are using a TV that does not support
NOTE
Progressive mode. Nothing will be
displayed on the screen if pressed.
If you press the P.SCAN button by
mistake when your TV does not support
Progressive mode, you need to release
the Progressive mode. To release the
Progressive mode, press the P.SCAN
button on the front panel 3 times.
The screen will recover after the PSO
LED on the front panel display turns off.
No