High-Pressure Hose, Spray Gun And Separating Oil - WAGNER HC 920 Mode D'emploi

2
1
4.3 High-pressure hose, spray gun and
separating oil
1. Screw the high-pressure hose (fig. 12, item 1) onto the
hose connection (2).
2. Screw HC 940-SSP • HC 960 and HC 960-SSP double
socket (3) into the high-pressure hose.
Screw on hose whip (4).
3. Screw connection socket (5) to the spray gun (6).
4. Screw spray gun with selected tip to the high-pressure
hose or hose whip (4), depending on the model.
5. Tighten union nuts at high-pressure hose and, depending
on the model, at the hose whip to prevent coating material
from leaking.
HC 920 • HC 940 • HC 960
All manuals and user guides at all-guides.com
GB
6. Fill in EasyGlide (fig. 13). Do not fill in too much separating
Attention
41
2
oil, i.e. ensure that no separating oil drips into the coating
material container.
EasyGlide prevents increased wear and tear to
the packings.
Starting operation
4
3
6
1
5
1
1