Table des Matières
Publicité
NOTE
All stick mixers are designed to operate only when the power buttons re-
main depressed.
4. For an extra boost of power during operation, the turbo speed button
( •• ) may be depressed. The power button ( • ) should be released when
selecting turbo speed.
5. To stop the stick blender, take your finger off the power button or the
turbo speed button.
6. To detach the shaft, rotate it counterclockwise until the two pieces se-
parate.
IMPORTANT
No longer running over 2 minutes. Especially when you feel the handle
blender motor surface become hot.
NOTE:
For milk frothing select low speed on the speed control dial. Please ensure
to use a large enough jug when frothing as milk may splash. Milk volume
can increase by up to 3-4 times of the original volume. A tall deep jug is
recommended over a short shallow jug. Fat content and temperature of the
milk will affect the way it froths.
NOTE
Frother should not be used with hot liquids.
Using the chopper
1. Place the chopper on the non-slip mat, ensuring the surface is clean and
level.
2. Fit the stainless steel chopping blade into the chopper bowl.
3. Place food into the chopper bowl. Ensure no hard substance is used and
cut small pieces as possible
4. Insert the motor housing into the hole on the lid; rotate it in a clockwise
direction until it locks into position.
5. Attach the lid onto the chopping bowl.
6. Plug the power cord into a 220-240 volt power outlet.
7. Select the optimal speed for the processing task by turning the speed
control dial and then depressing the power button ( • ). The small dot on
the speed control dial is the slowest and big dot is the fastest. Hold the
bowl with one hand while operating the power button with the other.
8. For an extra boost of power during operation, the turbo speed button
( •• ) may be depressed.
NOTE
The power button ( • ) should be released when selecting the turbo speed
button ( •• ).
9. To stop the stick blender, take your finger off the power button or turbo
speed button.
10. To detach the chopping bowl attachment, rotate it counterclockwise un-
til the two pieces separate.
All manuals and user guides at all-guides.com
Processing
Food
Attached
task
Detachab-
Aerating
Milkshakes,
le shaft
Smoothies, Cook-
tail, Fruit frappes
Detachab-
Pureeing
soups, sauces,
le shaft
dips, bady food
Detachab-
Ice crushing
cooktail, children's
le shaft
ice treats
Detachab-
Emulsifying
Salad Dressing
le shaft
Chopper
Mincing
Red meat, Chicken
fillets,Fish fillets,
Prawns.
Chopper
Chopping
Herbs,Nut,Olives,
Fruit,Vegetables
Chopper
Crumbing
Bread crumbs,
Desired consis-
tency , biscuit
Crumbs
Whisk
Whisking
Cream, Egg
whites, Light
batters
Milk
Milk, Frothing
Milk, Cold and
frother
Warm, beverages
CARE AND CLEANING
1. Always remove the power cord from the power outlet before cleaning
and remove the detachable stainless shaft of the stick blender.
NOTE
DO NOT immerse, that is, soak the detachable shaft of the stick blender in
water because overtime the lubrication on the bearings can wash away.
2. Wash the detachable shaft under running water, without use of abrasive
detergents.
Sug
Suggestion
gestion
Processing pro
setting
cedure
2-12
use chilled milk,
blend until desired
consistency is
achieved.
2-12
blend until smooth.
2-12
use small size ice
cubes & add 1/4 cup
water
1-7
Blend until well
combined
2-12
Use the chopping
blade.
2-12
Process 1/2 cup
at time, to ensure
evenly sized pieces.
1-10
Tear bread roughly,
process until desi-
red consistency.
Break biscuit into
pieces & process
until crumbed
2-12
Lower whisk into
food and whisk to
desired consistency.
Use a large vessel
to avoid spillage.
1
Lower milk frother
attachment into be-
verage and froth to
desired consistency.
Use a tall vessel to
avoid spillage.
Publicité
Table des Matières
