Fixed Panels Installation (Cont.) - OVE AMBER Mode D'emploi

FIXED PANELS INSTALLATION (CONT.)

1. Use a box cutter to cut the rubber gasket (N) covering the opening at the bottom of the fixed panels (M) &
(V).
2. Place the bottom panel holder (O) in the fixed panel's bottom openings. Mark the hole with a pen and then
drill a guide hole through the acrylic base.
3. Screw the holders (O) in place on both fixed panels (M) and (V), using the screws (HH).
4-5. Install the second part of the holders (O) with the corresponding bolt. Use a ratchet to strongly tighten the
bolts. Place the decorative clips (HH) on top of the bolts.
3
HH
1
&
M V
N
4
O
12
2
O
&
M V
5