Granby 100 Serie Instructions D'installation page 19

Econoplus Series 100, 200 and 300 ELECTRIC FURNACES
INSTALLATION INSTRUCTIONS – HOMEOWNER'S MANUAL
1.0 Scope and general instructions
1.1 Installer and service technician
Use this installation guide for the initial set‐up of the furnace and for subsequent service and maintenance. Keep
this document near the unit for easy reference.
1.2 Homeowner
This guide details the different modes of operation of your unit. Please read this guide after the initial
installation by your installer and keep it handy afterward for future reference.
1.3 Models covered and description
•
Series 100
The 100 series is the basic electric furnace. These furnaces are factory assembled for operation with a single
stage or standard thermostat. They also have a cooling relay factory installed to enable high speed operation
when coupled with an air conditioning unit at 0.5''W.C. (Suffix C).
Model
Econoplus
115
115‐C
118
118‐C
119
119‐C
Table 1 – Series 100 characteristics
•
Series 200
The 200 series is the same basic electric furnace with more functional options. These furnaces are factory
assembled for operation with a 1, 2 or 3 stages thermostat. When used with a multi‐stage thermostat the
unit will modulate its power depending on the stage calling for heat. The furnace is factory assembled with a
three positions switch to manually choose the level of heat if installed with a one stage thermostat. The
intermediate modes of heating are detailed in tables 2 and 3 and explained later in this guide. The Series 200
also comes with a low speed fan switch that enables operation of the lowest speed of the motor for
continuous ventilation when needed. The Series 200 also has a cooling relay to permit high speed operation
when matched with an air conditioning unit. Suffix C indicates operation at 0.5" W.C. at high speed.
•
Series 300
Series 300 has the same functionality of series 200 while being equipped with a 120V motor‐blower
combination. This series also comes with, as standard equipment, a 120V terminal strip enabling connection
KW Total Volts
Amps (V/Hz/Ph)
15 64.4 240/60/1
15 64.8 240/60/1
18 76.9 240/60/1
18 77.3 240/60/1
19 78.4 240/60/1
19 78.8 240/60/1
Motor Motor Static
(HP) Speed Pressure
¼ ‐ 240 Med.
¼ ‐ 240 High
¼ ‐ 240 Med.
¼ ‐ 240 High
¼ ‐ 240 Med.
¼ ‐ 240 High
CFM ΔT
o
( F)
(''W.C.)
0.2 925 51
0.5 1050 45
0.2 925 59
0.5 1050 52
0.2 925 63
0.5 1050 65