Thermo Scientific BioCane Serie Mode D'emploi page 8

Section 1
Safety Information
1-2 Cryobiological Storage Vessel
Warnings
• This unit is intended to be used by trained personnel in a well-
ventilated environment.
• Liquid nitrogen is extremely cold; it boils at -196°C.
• Follow all necessary precautions and warnings relevant to applicable
hazards such as frostbite, contact burn, asphyxiation, etc. in cryogenic
areas.
• To avoid injury due to frostbite or ruptured vials, use extreme care
whenever handling liquid nitrogen, liquid nitrogen storage or transfer
vessels or any objects which have come in contact with liquid
nitrogen.
• Leave no areas of skin exposed.
• Wear adequate PPE where necessary: face shield, cryogenic gloves,
cryogenic apron.
• Only use the power supply provided with the unit.
• Do not tightly seal liquid nitrogen containers or prevent nitrogen gas
from escaping.
• Always handle vials with tongs.
• Use extreme care to prevent spilling and splashing liquid nitrogen
during transfer and removal of storage contents and holders.
• Immediately remove any clothing or safety attire on which liquid
nitrogen has been spilled or splashed .
• Get immediate medical attention for any frostbite injuries due to
liquid nitrogen.
• Never overfill liquid nitrogen vessels.
When inserting or removing cans, be careful not to come in contact
with the neck tube area of the vessel. Remove or insert cans slowly,
in a vertical manner. Scratches on the neck tube can cause premature
vacuum failure.
Do not tamper with, or remove vacuum port (covered by black
plastic cap on side of vessel); this will void warranty.
Do not spill liquid nitrogen on vacuum port - this can cause vacuum
failure.
Always keep liquid nitrogen in an upright position.
Thermo Scientific