Table des Matières
Publicité
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that this
unit be installed by a licensed, professional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
• Inspect the faucet for shipping damage before
installation. Hansgrohe will not honor claims for
shipping damage after the faucet is installed.
• This faucet does not include a drain or a pull rod.
• The check valves should be inspected yearly, and
replaced if dirty or worn (see page 14).
2
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.2 GPM
1⅜"
1⅝"
• The included adapters must be used. They adapt the
• Keep this booklet and the receipt (or other proof
G ⅜ supply hoses to ⅜" stops.
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Publicité
Table des Matières
