Error Codes - AEG ARE5047XB Mode D'emploi

ERROR CODES & ALARMS
Alarms
Alarm Icon
All Freezer Model

Error codes

Error code
Communication Error
Sensor
– Open Circuit /Short Circuit
All manuals and user guides at all-guides.com
What it means
Freezer Temperature Alarm
(Except Single door freezer)
Activates if the freezer temperature is
10°C over set temperature for a period
of 50 minutes (except during a
defrost).
An alarm will sound the temperature
icons will flash.
Door Alarm
Activates if the refrigerator or freezer
doors are left open for longer than 2
minutes.
An alarm will sound the affected
compartment icon will flash and the
temperature and icons will fade on
and off.
What it means...
If you see this icon displayed (electronic
display models) or the top temperature
icon is flashing it means that the control
has lost contact with the main
control board.
The appliance will operate at its last known
setting, all auxiliary functions will not work.
If you see this icon displayed (electronic
display models) or any combination of the
second and fourth temperature icons are
flashing it means that an error has been
detected on a sensor.
The refrigerator will run in a default cycle to
prevent food spoilage.
Operation
To deactivate the alarm for 50 minutes press
any button.
To deactivate alarm for 12 hrs on the ice &
water model press and hold Select Mode for 10
seconds for non ice and water models press
and hold any button for 10 seconds.
Alarm will sound and icon will flash
•
indicating which door is open.
(Ice & water models)
To silence the alarm for 8 minutes while
•
the door is open press any button (the
icons will continue to flash until door is
closed).
What to do...
Turn the unit off at the power point for 5
minutes and then turn it back on.
Under most circumstances this will reset
the display enabling normal function to
continue.
If the error re-occurs then call
for service.
Call for service.
English 19