Interior Fittings; Special Features - Bosch KDN Serie Notice D'utilisation

Interior fittings

Shelves and containers
You can reposition the inner shelves
and the containers in the door as
required: pull shelf forwards, lower
and swivel out to the side. Lift
the container and remove.

Special features

(not all models)
Butter and cheese compartment
To open the butter compartment, gently
press in the middle of the butter
compartment flap.
To clean the compartment, lift
it at the bottom and take out.
Breakfast set
Fig. &
The containers for the breakfast set can
be taken out and filled individually.
You can take out the breakfast set for
loading and unloading. To do this, lift the
breakfast set and pull out. The container
holder can be moved.
Bottle shelf
Fig. %
Bottles can be stored securely on
the bottle shelf.
Variable shelf
Fig. '
Use the variable shelf to store tall items
like tins or bottles on the shelf below.
You can pull the right-hand section of the
variable shelf forwards, lower and push it
underneath the left-hand section of the
shelf.
All manuals and user guides at all-guides.com
Ice cube tray
Fill the ice cube tray ¾ full of drinking
water and place in the freezer
compartment.
If the ice tray is stuck to the freezer
compartment, loosen with a blunt
implement only (spoon-handle).
To loosen the ice cubes, twist the ice tray
slightly or hold briefly under flowing
water.
Ice maker
Fig. +
1. Take out the ice cube tray.
2. Fill the ice cube tray ¾ full with
drinking water.
3. Re-insert the ice cube tray.
4. When the ice cubes are frozen, rotate
the knob on the ice cube tray several
times to the right and release.
The ice cubes loosen and fall into the
storage container.
5. Remove the ice cubes from the
storage container.
Ethylene absorber
Note
For important safety instructions and
information about installation and use,
see the enclosed installation and
operating instructions for the ethylene
absorber.
The ethylene absorber slows down
ripening of ethylene-sensitive fruit and
vegetables to keep them fresher for
longer.
1. Insert the timer in the housing at the
front and push in the timer button.
The timer is now activated for
6 months.
en
17