Service Access; Care And Cleaning - Bunn Sure Immersion 220 Guide D'installation Et D'utilisation

DAILY
The use of a damp cloth rinsed in any mild, non-abrasive, liquid detergent is recommended for cleaning all
surfaces on Bunn-O-Matic equipment.
Exterior Surfaces
• Do not use any abrasive materials.
• Use a soft, dry cloth to wipe down the exterior surfaces of the dispenser to maintain the luster of the
stainless steel finish.
• Wash the stainless steel interior surfaces of the dispenser with warm, soapy water. Rinse with warm,
clear water. If the water is hard, wipe the dispenser dry with a soft cloth to prevent spotting.
• Use cleaning cloth provided, to clean the acrylic door panel.
Parts Washing
a. Remove and wash the drip tray and drip tray
cover in a mild detergent solution.
b. Rinse thoroughly.
c. Wipe the lower front panel, door, and cabinet
with a clean damp cloth.

SERVICE ACCESS

1. Press and hold the BUNN logo at the top
of the screen for 3 seconds to access the
SERVICE ACCESS screen.
2. From the SERVICE ACCESS screen, press the
Care and Cleaning button.

CARE AND CLEANING

CLEANING SUPPLIES INCLUDED WITH MACHINE
1. Brush and cloth for touchscreen cleaning.
2. Low foam tablets formulated specifically for
Sure Immersion systems.
28
1
2
continued >