Bunnlink Activation - Bunn Sure Immersion 220 Guide D'installation Et D'utilisation

► BUNNlink
Models Only or Purchase Required. If you experience any issues with Activation, contact a
®
BUNNlink administrator: bunnlink@bunnlink.com.
1. Scan the QR Code located on the machine.
NOTE: If this is a kit install; scan the QR Code sticker located in the package
or on the back of the BUNNlink board itself.
If the board is already installed, then make this the first step. This will allow
plenty of time to establish a cloud link connection*
*The serial number will display and activation date will read "Not Activated".
2. a) Once the QR code is scanned on a smartphone or tablet this screen will display.
b) Enter the pin 6601.
c) When the digits are entered in the text boxes click the submit. The far right image shows an incorrect
pin number represented by the red error message.
3. The activation page shows the MAC address of the
board. Verify this number matches the IMEI number on
the board itself.
4. Press activate to continue.
5. After selecting the activate button there will be
a confirmation screen to confirm the activation
of the board.
6. Upon successful activation this screen will show on the device. Confirm the
MAC address and IMEI match. SIM card information, activation date, and the
network status will display.
NOTE: Network status is not an indication of the board establishing a cloudlink
connection. Activation of the board can take up to fifteen minutes as stated on
the activation page. The board is completely activated once the LED changes
color from blue to green.
7. Verify the gateway has been connected, the machine serial
number, signal strength, and cloud link by accessing the
BUNNlink tab from machine settings on the unit.
8. See page 14 for BUNNLink Product
Registration.
BUNNlink LTE ACTIVATION
a
b
3
12
c
5
4
6
continued >