Print Settings - Bunn Sure Immersion 220 Guide D'installation Et D'utilisation

2. Insert a USB stick into the USB port on the back
side of the front door.
3. Press OK.
4. The main screen will return.
5. Remove USB stick.
6. Close door.

Print Settings

1. Printer setting can be sent to the printer by
pressing the Print Settings button.
2. Press OK to print the printer settings.
Print Last Receipt
On the SERVICE ACCESS panel, the last receipt
can be printed by pressing the Print Last Receipt
button in the lower right.
BARCODE PRINTER SETUP
25
2
3
1
2