Niko 05-353 Mode D'emploi page 61

05-353
Error indication LED (fig. A)
In case of normal operation, this LED does not light. The LED
only lights if problems with dimming the load occur:
RF reception LED (fig. A)
EN
The LED lights continuously =
Current mode: reverse phase control
The LED blinks =
Current mode: phase control
The LED lights continuously =
The dimmer operates with reverse phase
control and cannot dim the load due to an
error (overload, overvoltage,...)
The LED blinks =
The dimmer operates with phase control
and cannot dim the load due to an error
(overload, overvoltage,...)
The LED blinks during RF reception
61