Niko 05-353 Mode D'emploi page 57

05-353
Example 2: OFF with time delay and a 3-minute run time
See mode 5 on the left flap of the booklet.
Note 1: if no action is performed in programming mode for 3
min, programming mode will be exited automatically.
Selective Erase mode
You can selectively erase an action that you have already
programmed in mode 1,2,3,4 OR 5. The remaining programming
will be retained.
E.g. you want to erase the previously programmed mode 1
Erase All
You want to erase all actions that you have already
programmed:
EN 57