Controls - GE AET05 Manuel D'utilisation Et Instructions D'installation

About the controls on the air conditioner
Features and appearance will vary.

Controls

Mode Control
High Cool and Low Cool provide cooling with
different fan speeds .
Fan settings provide air circulation and filtering
without cooling .
NOTE: If you move the mode control from a cool
setting to OFF or to a fan setting, wait at least
3 minutes before switching back to a cool
setting .
Cooling Descriptions
For Normal Cooling—Select High Cool or Low
Cool with the TEMPERATURE control at midpoint .
For Maximum Cooling—Select High Cool with
the TEMPERATURE control at the highest number
available on your knob .
For Quieter and Nighttime Cooling—Select Low
Cool with the TEMPERATURE control at midpoint .
4
All manuals and user guides at all-guides.com
MODE CONTROL
(on some models)
TEMPERATURE CONTROL
TEMP Control
The TEMP control is used to maintain the room
temperature . The compressor will cycle on
and off to keep the room at the same level of
comfort . When you turn the knob to a higher
number, the indoor air will become cooler . Turn
the knob to a lower number and the indoor air
will become warmer .