Controls - GE AKT05 Manuel D'utilisation Et Instructions D'installation

About the controls on the air conditioner.
Features and appearance will vary.
MODE CONTROL

Controls

Mode Control
High Cool and Low Cool provide cooling with
different fan speeds.
Fan settings provide air circulation and
filtering without cooling.
NOTE: If you move the mode control from a cool
setting to OFF or to a fan setting, wait at least
3 minutes before switching back to a cool setting.
Cooling Descriptions
For Normal Cooling—Select High Cool with the
TEMPERATURE control at midpoint.
For Maximum Cooling—Select High Cool with the
TEMPERATURE control at the highest number
available on your knob.
For Quieter and Nighttime Cooling—Select Low Cool
with the TEMPERATURE control at midpoint.
Additional important information.
Air Direction
Use the lever to adjust the air direction left and
right only.
4
TEMPERATURE CONTROL
TEMP Control
The TEMP control is used to maintain the
room temperature. The compressor will cycle
on and off to keep the room at the same level
of comfort. When you turn the knob to a
higher number, the indoor air will become
cooler. Turn the knob to a lower number and
the indoor air will become warmer.
Appearance may vary.