Atlantic TATOU DIGITAL Notice D'utilisation Et D'installation page 31

L
OCKING THE DEVICE ONTO THE HANGING FRAME
1
Position the tilted
device on brackets
S1.
3
Lower the device onto the hanging frame. A
click tells you that the device is fastened
and locked in place.
To unlock the device from the hanging frame, take a flat-bladed screwdriver and push
the slider (located on the top left-hand corner of the hanging frame behind the device)
towards the wall.
Lift the device while holding the slider in place with your screwdriver. Tilt it
forwards and then remove it from brackets S1.
2
Pivot the device
upwards and lift it to
position it on brack-
ets S2.
CLIC
30