Cleaning Mode Selection - ECOVACS ROBOTICS DEEBOT 4 Manuel De L'utilisateur

3.3 Cleaning Mode Selection

DEEBOT 4 has several Cleaning Modes to choose from to effectively clean different floors.
Cleaning Modes are selected using the Remote Control.
* Pause DEEBOT 4 before switching Cleaning Modes.
1 AUTO Cleaning Mode
This is the most commonly used mode. In
AUTO Cleaning Mode, DEEBOT 4 cleans in
a straight line and changes direction when it
meets an obstacle.
Edge Cleaning Mode
3
This mode is good for cleaning the edges and
corners of a room. In Edge Cleaning Mode,
DEEBOT 4 cleans along a border (e.g. wall).
3. Operating and Programming
2 Spot Cleaning Mode
This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning
Mode, DEEBOT 4 focuses on a specific area
to clean.
Return to Charger Mode
4
When battery power gets low, DEEBOT 4
automatically switches to Return to Charger
Mode and returns to the Charging Dock to
recharge itself.
DEEBOT 4 can be also be sent back
*
to the Charging Dock at any time by
pressing the Return to Charger Mode
Button on the Remote Control.
11
EN